Skip to main content
Related Search Topics: Installation, Setting Up & Drivers
Print this support article

Installing the roll in the Brother QL1050 printer for SendPro Online

Learn how to install the roll in the Brother QL1050 printer for SendPro Online.
Products affected: SendPro® Online

The only roll that can be used with the Brother QL1050 printer is item number 2F3-P in the Pitney Bowes Online Shop. However, "2F3-P" does not appear anywhere on the roll itself. Instead, the roll shows item number DK-1241.

  1. Remove the tape strip from the end of the roll and insert the roll as shown here.
    Insert the roll into the Brother QL1050 printer
  2. Feed the roll under the black paper guide and through the feeder until at least an inch of paper is visible on the outside of the feeder.
    Feed the roll into the Brother QL1050 printer
  3. Close the lid firmly, making sure each latch is secure.
    Close the lid on the Brother printer
  4. Press the Feed button. The roll will wind backward to properly align for the next print.
    Brother printer feed button

UPDATED: 14 August 2021