How to use the attached scale on the DM400, DM500 and more

print
Products affected: DM400™, DM500™, DM550™, DM800™, DM800i™, DM900™, DM1000™, and DM1100™
There are two ways to use the attached scale.  You can set the mode to attached scale, or you can turn auto scale on.

To set the mode to attached scale:
  1. Press Mode
  2. Select Attached scale
  3. The meter will now prompt you to select your class and any additional services
With auto scale turned on, if an item is placed on the scale, the meter will rate the item using the currently selected class. If the current class can not support the weight placed on the scale, it will prompt you to select a new class.

To turn auto scale on:
  1. Press Menu
  2. Select Setup
  3. You may need to arrow down
  4. Select Scale/Rate
  5. Set Auto Scale to On
  6. Reboot the meter

UPDATED: May 25, 2015