Downloading and installing the Pitney Bowes 1E26 printer driver for SendPro

Learn how to download and install the Pitney Bowes 1E26 printer driver for SendPro.
Products affected: SendPro™
To download and install the Pitney Bowes 1E26 printer driver:
  1. Go to the Pitney Bowes 1E26 driver download page.
  2. Select the Download button.
  3. Select the I’m not a robot box and complete the verification task.
  4. The printer driver will be downloaded to your computer.
  5. Go to your Downloads folder and double-click on the downloaded file.
  6. Select Next.
  7. Under How is this printer going to be attached?, select the type of connection you are using.
  8. Connect the 1E26 printer to your computer. When the printer is detected, the printer wizard will automatically advance. If the Add Hardware wizard appears, cancel it.
  9. On the next screen, the Pitney Bowes 1E26 printer should be listed. Leave Install a driver for a Plug and Play printer selected and select Next.
  10. On the next screen, leave the printer name Pitney Bowes 1E26 and select Next.
  11. Select Finish.
  12. When Windows asks Would you like to install this device software?, select Install.
  13. Wait for the driver to be installed.
  14. On the Seagull Driver Wizard Completed Successfully screen, select Close.
  15. Select the Windows Start menu > Devices and Printers.
  16. Right-click on the Pitney Bowes 1E26 icon and select Printing preferences.
  17. Select the Graphics tab.
  18. In the Dithering section, select Error Diffusion.
  19. Select the Dithering Setup button.
  20. From the Algorithm menu, select Burkes.
  21. Select OK.
  22. Select Apply.
  23. Select OK.

UPDATED: 14 August 2021