Adding or removing a dialling prefix on the DM100, DM125i, DM175i

Print this support article
Products affected: DM100, DM125i, DM175i (P725)

Enter a dialling prefix in your franking machine if you need to dial a number to reach an outside line. This will depend on your phone system configuration.

We recommend that you switch to a faster, more reliable digital connection.

Order a SmartLink device

Adding a dialling prefix

  1. Press Options.
  2. Press Page Down twice.
  3. Select Connect-Data Centre.
  4. Select Phone Parameters.
  5. Select Dialling Prefix.
  6. Enter the required prefix.
  7. Press Continue.
  8. Press Home to return to the Home screen.

Changing or Removing a dialling prefix

  1. Press Options.
  2. Press Page Down twice.
  3. Select Connect-Data Centre.
  4. Select Phone Parameters.
  5. Select Dialling Prefix.
  6. Press Clear to delete the dialling prefix. Add a new number if required.
  7. Press Yes/Enter to accept the changes.
  8. Press Home to return to the Home screen.

If you are unable to connect to the internet, ask your IT department or internet provider to check the internet settings before you contact Pitney Bowes. If you still need assistance, please use the Contact Us options below.

UPDATED: 22 April 2021