Activating/Disabling Weight Hold Mode on the DM50-DM60

Use this mode when the size of the mail piece covers the display screen.
Products affected: DM50/DM55 (K721), DM60 (K722)
If you are unable to see the screen of your device when weighing your mail piece due to its size you can hold the weight on the screen to view once you have removed the mail piece.

1.Press Menu/Options.
2.Use the Review ▲▼ keys to scroll to "Change Setup", then press Enter/yes to confirm.
3.Use the Review ▲▼ keys to scroll to "Change weight hold setup?", then press Enter/yes to confirm.
4.Follow the prompts to turn the feature ON or OFF.
5.When finished, follow prompts to return to the Home screen.

The DM60 Series holds the weight in memory until you select a class and finish the rating process. When using this mode:
  • "WH" displays when the weight is in memory.
  • The weight remains for 10 seconds after the piece is removed.
  • To extend the time, press Enter/yes.
  • To clear the weight before the 10 seconds finish, press Clear/Back.

UPDATED: 22 June 2021