Setting or changing the Normal Preset on the DM300-DM475

Learn how to set or change the Normal Preset on the DM300c / DM400c / DM475c (G920) and DM300M / DM400M / DM475M (G922).
Products affected: DM300c™, DM400c™, DM475c™ (G920); DM300M™, DM400M™, DM475M™ (G922)
The Normal Preset is the default setting on your franking machine that you define with your most commonly used values, such as Class and Mail type.

The Normal Preset values will be the default state on your mailing system when it is first powered on, and after it wakes from sleep mode. Pressing the Normal Preset key when on the Home screen will return your meter to these default values.

Note: You cannot edit the Normal Preset. To change it, define a new Normal Preset to replace the previous one.

Watch this video or follow the instructions below to learn how to save a preset.

Before you create a new preset, first select the desired settings on your meter:
  1. From the Home screen, select Class and select the options that you wish to be saved as a preset:
    • Carrier
    • Class
    • Mail type (Letter, Large Letter, etc)
  2. From the Home screen, select an Ad (if an Envelope Message is required).
  3. Select a Text message (if required).
The franking machine returns to the Home screen. The Home screen now displays the class and mail type (and the corresponding price), ad and text message.

To save these values as a non-default option, see How to create a custom preset on the DM300, DM400 and DM475.

To define a new Normal Preset:
  1. Press the Options key.
  2. Press Page Down and select Preset Options.
  3. Select Set Normal Preset.
  4. Press OK to confirm.

UPDATED: 16 December 2021