Skip to main content
Print this support article

Creating a lock code on the DM50-DM60

Learn how to create a lock code on the DM50/DM55 (K721) and DM60 (K722).
Products affected: DM50™ / DM55™ (K721), DM60™ (K722)
The Lock Code feature prevents unauthorised access to the franking machine after it has entered sleep mode, or when it is powered up.
  1. Press the Menu / Options key.
  2. Press Review (up) to scroll to Change Setup?
  3. Press Enter/Yes.
  4. Press Review (down) to scroll to Use Lock Code Setup?
  5. Press Enter/Yes.
  6. Press Enter/Yes at the Set A Lock Code? prompt.
  7. Enter a four digit code. 
  8. Press Enter/Yes.
  9. Re-enter the four digit code.
  10. Press Enter/Yes. Lock Code Set is displayed.
  11. Press Enter/Yes at the Change setting for Lock on Sleep prompt. 
  12. Press Enter/Yes at the Change to On prompt.
  13. Press No at the Stay in setup? prompt.
Once a lock code is created, press the Lock button to lock the franking machine.
To unlock the franking machine, enter the 4-digit pin and press the Enter/Yes key.

To change the lock code, see the How to change a lock code on the DM50/DM55 and DM60 page.

To disable the lock code, see the How to disable the lock code on the DM50/DM55 and DM60 page.

 

UPDATED: 04 April 2022