Turning the preset feature on and off on the DM50-DM60

Print this support article
Products affected: DM50/DM55 (K721), DM60 (K722)
A preset allows you to save as default the franking machine settings that are most commonly used:
  • Carrier
  • Class
  • Mail type (Letter, Large Letter, etc)
  • Ad (Envelope Message)

If the preset feature is enabled, the franking machine reverts to the preset values when it is turned on or wakes up from sleep mode.

If the preset feature is disabled, the franking machine reverts to the values last used.


Note: The franking machine can only hold one preset.

To turn the preset feature on:
  1. Press Menu / Options key.
  2. Press Review (up) until the display says Change Setup?, press Enter/Yes.
  3. Press Review (down) until the display says Use preset setup?, press Enter/Yes.
    1. If the preset feature is already ON, the display will show View stored Preset?.
    2. If the preset feature is OFF, the display will show Turn Preset ON?.  Press Enter/Yes to turn on.
  4. When the franking machine displays View stored Preset?, press Enter/Yes to view your preset values if needed.
  5. When finished, press Clear once and follow the prompts to return to the Main screen

To turn the preset feature off:
  1. Press Menu / Options key.
  2. Press Review (up) until the display says Change Setup?, press Enter/Yes.
  3. Press Review (down) until the display says Use preset setup?, press Enter/Yes.
    1. If the preset feature is ON, the display will show View stored Preset?. Press Review (down) twice until the franking machine displays Turn Preset OFF?. Press Enter/Yes to turn off.
    2. If the preset feature is already OFF, the display will show "Turn Preset ON?". Press No.
  4. Press No to return to the Main screen.
Related topics

UPDATED: 14 August 2021