Skip to main content
Related Search Topics: Features & Settings Errors & Troubleshooting
Print this support article

Loading the sheet feeder on the Relay 2000-4000

Learn how to load the sheet feeder on the Relay 2000, Relay 3000, and Relay 4000.
Products affected: Relay 2000™, Relay 3000™, Relay 4000™
Watch this video or follow the directions after the video to learn how to load the sheet feeder on the Relay 2000, Relay 3000 and Relay 4000:



Load the sheet feeder:
  1. Turn the side guide knob anticlockwise to widen the side guides.
  2. Shingle and tamp the material to be loaded.
  3. Feed the material 3/4 of the way into the feeder.
  4. Turn the side guide knob clockwise until the side guides touch the paper.
  5. Turn the side guide knob counterclockwise until there is an 1/8 inch (3mm) gap between the side guide and the paper.
  6. Press down on the spring loaded deck and slide the material into the feeder tray.

UPDATED: 04 April 2022