Error codes that indicate missing rates on the DM300C-DM475

Print this support article
Products affected:
DM300c™, DM400c™, DM475c™ (G920)
DM300M™, DM400M™, DM475M™ (G922)


Your franking machine displays one of the following error codes indicating that your franking machine is missing rates: 110c, 1103, 11DA, 1109


Your franking machine is missing rates.


  1. Ensure the franking machine is connected to either your network if using a wired or wireless connection, your PC if using PC meter connect or an analogue phone line.
  2. Remove the power lead and wait ten seconds. The display shuts down.
  3. Next, replace the power lead.
  4. Once the franking machine initialises, press the Refill Postage button.
  5. Select Check PbP Balance.
  6. The machine automatically dials and connects.
  7. As soon as the franking machine connects, the PBP balance screen appears.
  8. Select No to skip adding funds.
  9. The machine then checks for the download and installs the new rates.
  10. When the update finishes, follow the prompts until you return to the main screen. All errors should be resolved.
If you need further assistance, please use the Contact Us options below.

UPDATED: 14 August 2021