Disabling the lock code on the mailstation series

print
Products affected: mailstation™, mailstation2™

Use the lock code to prevent unauthorized access to your system after your machine powers up and/or enters sleep mode.

  1. Press Menu.
  2. Press Review (down) to scroll to Change setup?
  3. Press Enter/Yes.
  4. Press Review (down) to scroll to Use lock code setup?
  5. Press Enter/Yes.
  6. Enter your 4-digit lock code
  7. Press Enter/Yes.
  8. Press Review (down) to scroll to Turn Lock OFF?.
  9. Press Enter/Yes.
  10. Press No when asked to Stay in Setup? to return to the Home screen.

If you need further assistance, please use the Contact Us options below.

Related article

UPDATED: February 16, 2021