How to run install mode on the SendPro 300

Print this support article
Products affected: SendPro® 300
Running "Install Mode" allows you to review, and change if desired, most of the values that were selected when the machine was first installed.

Caution: Do not run this option unless directed to do so by your Pitney Bowes representative.

To run the install mode:
  1. From the Home screen, select Mail.
  2. Select Options from the list on the left.
  3. Select Advanced Features.
  4. Select Run Install Mode.
  5. Enter the hours and select Return.
  6. Select OK and Continue.
  7. Enter the minutes and select Return.
  8. Select OK and Continue.
    • If the time is wrong, select Adjust the time and return to step 5.
    • If the time is correct, select Time is Correct.
  9. Insert an envelope to print a test print.
    • If the test pattern has breaks or the print is uneven, select NO. A purge will happen and you will return to step 9 to do another test print.
    • If the test pattern has no breaks or uneven printing, select YES.
  10. When the machine says Installation Success! Install complete, select OK.
  11. Enter the scale location code and select Return. For a list of codes, see Scale Codes for locations in the United States.
  12. Select Continue.
If you require additional assistance, contact customer support from 8 am to 8 pm Eastern Time. Please have your model number ready.

UPDATED: June 08, 2021