How to upload accounting data on the DM125 and DM225 to Total Meter Reporting

Print this support article
Products affected: DM125™, DM225™ with INVIEW™ and Total Meter Reporting
If you are using INVIEW™ accounting and Total Meter Reporting on the DM125 and DM225, you will need to upload your accounting data to the Data Center. Software Support recommends that you upload your data at least once a week.

Note: INVIEW™ and Total Meter Reporting are optional features. Contact your Sales Representative for information about options and pricing.

To upload your data:
  1. Before you start, make certain that your system is connected to PC Meter Connect, a USB Ethernet Connectivity Kit, or WiFi Connection Device in order to communicate with the  Data Center.
  2. Press Options.
  3. Press Page Down twice.
  4. Select Advanced Features.
  5. Select Inview Records.
  6. Enter the Supervisor Password.
  7. Select Upload Records.
Note: If the meter is unable to connect to the Data Center, see Resolve connection errors on the DM100i and DM200L and Resolve connection errors on the DM125 and DM225 .

If you require additional assistance, contact technical support. Please have your model and serial number ready.

UPDATED: February 17, 2021