How to install the sealer on the DM300C

print
Products affected: DM300C™
Follow the steps below to install the optional moistener:
  1. Position the moistener tray on the left side of the meter deck.
User-added image
 
  1. Hold down the blue feeder clearance lever.
  2. Slide the moistener tray from left to right, with the lip of the moistener above the deck.
User-added image
 
  1. Fill the moistener reservoir with Pitney Bowes E-Z Seal® sealing solution.
User-added image

UPDATED: July 10, 2020