How to enter a manual weight on the SendPro 300

Print this support article
Products affected: SendPro® 300
To enter the weight manually when you already know the weight of a mail piece and are not using the integrated weighing platform:
  1. From the Home screen, select Mail.
  2. From the list on the left, select Weigh/Rate.
  3. Select Enter weight manually.
  4. Select Enter Pounds and enter the pounds (maximum 70 lbs).
  5. Select the Return key.
  6. Select Enter Ounces and enter the ounces.
  7. Select the Return key.
  8. Select Continue.
  9. Scroll to change or validate the mailing and account options, and select Done when finished to save the options and return to the Mail screen.
  10. Apply postage to the mail piece:
  • If using the moistener: Place the envelope flap side down along the back wall of the moistener and slide the envelope flap under the blue edge of the moistener unit. Slide the envelope towards the right until the system grasps it.
  • If not using the moistener: Place the envelope or tape strip up against the registration wall of the system and slide it to the right until the system grasps it. The system prints the meter stamp and ejects the envelope or tape strip.

UPDATED: October 17, 2016