Setting the time on the DM300C-DM475

print
Products affected: DM300C™, DM400C™, DM450C™, and DM475™
You may need to change the time on the DM300C, DM400C, DM450C, or DM475 machine due to the internal clock drifting. 
 

Follow these steps to a or subtract up to 120 minutes (2 hours) from the current time.

  1. Press Menu.
  2. Select Setup.
  3. Select Time and Timeouts.
  4. Select Correct Time Drift.
  5. Enter the new time and select Accept.
  6. Select Yes.
  7. The display returns to the Time and Timeouts menu.

Follow these steps if the time is off by more then 2 hours.

  1. Press Menu.

  2. Press Page Down until Advanced Features displays.
  3. Select Advanced Features.
  4. Select Run Install Mode.
  5. Select English.
  6. Enter the correct hours and minutes.
  7. Select AM or PM.
  8. Select This Is Correct.
  9. Press C/Back.
  10. Select Quit the Install.
  11. Select Yes.
Use the Contact Us options below if you need further assistance.

UPDATED: May 28, 2020