Setting the normal preset timeout on the DM300C, DM400C, DM450C, and DM475

Print this support article
Products affected: DM300C™, DM400C™, DM450C™, and DM475™
The normal preset timeout is the amount of time inactive before the meter will return to the normal preset. Watch this video or follow the steps after to set the normal preset timeout:

Follow these steps to set the amount of time the display takes before it reverts to the Normal Preset:
  1. Press Menu.
  2. Select Setup.
  3. Select Time and Timeouts.
  4. Select Normal Preset Timeout.
  5. Enter the number of minutes (from 1-240) for the system to wait before returning to the Normal Preset.
  6. Select Accept.
  7. Press Home to return to the home screen.
If you require additional assistance, contact technical support. Please have your model and serial number ready.

UPDATED: September 06, 2018