How to set the sleep timeout on the mailstation and mailstation2

Print this support article
Products affected: mailstation™, mailstation2™
When the meter is in sleep mode, the display is blank except for the time in the lower right, and mail cannot be processed. To wake the meter, press any button on the control panel.

Note: If the lock code option has been set to activate on sleep mode, the lock code will need to be entered to wake the meter.

To set the amount of time the meter waits before entering sleep mode:
  1. Press Menu.
  2. Press Review(down) to scroll to Change Setup?
  3. Press Enter/Yes.
  4. Press Review(down) to scroll to Change sleep timeout?
  5. Press Enter/Yes.
  6. Enter the desired amount of time (in minutes, from 1 - 20) that the meter should be idle before the sleep mode activates.
  7. Press the Enter/Yes button. A message confirms the choice.
  8. When prompted to stay in setup, press No to return to main screen.

UPDATED: August 14, 2021