To create a Duplex job, the AFP profile option (FORMDEF) should be set as F1DUPLEX.
Subject: AFP : FORMDEF Duplex
Initial Details: Hi, We have two AFP files and none of the file contains the FORMDEF resource. Above attached is the same with name AFPs.zip. As per client, one of the file is simplex(odpsp08490.20140827.133758.afp) and other one is duplex (nsfod07218.20151028.112504.AFP). When we opened the files in Pitney viewer, both of the files were simplex. We have set FORMDEF=F1DFAULT1 in the profile. Is this value of FORMDEF causing the file to print simplex? What would be the value of FORMDEF to set the plex mode of the file to DUPLEX? Also, attached is the Pitney script with name TD.zip. Thanks, Pooja Verma ITS / Programmer Analyst II FIS Output Solutions T: 172.331.9756 C: 987.854.9637 E: firstname.lastname@example.org FIS | Empowering the Financial World [cid:image001.png@01D112FA.C4A77D90] [cid:image002.png@01D112FA.C4A77D90] [cid:image003.png@01D112FA.C4A77D90] _____________ The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you. ________________________________
UPDATED: August 11, 2017