Skip to main content
Related Search Topics: Features & Settings
Print this support article

Setting the time on the DM100i-DM225

Learn how to set the time on your DM100i, DM125, DM200L, and DM225.
Products affected: DM100®i, DM125™, DM200L™, DM225™
Meter time settings can be changed, including:
  • daylight savings time
  • the time your system advances to the next day
  • the length of time your system remains inactive before reverting to the Normal Preset values

If your time is off by less than 2 hours, follow these steps.
  1. Press Options.
  2. Press Page Down.
  3. Select Time and Timeouts.
  4. Press Page Down.
  5. Select Correct Drift.
  6. Add or subtract minutes from the displayed time as needed.
  7. To move your time ahead, select Add 1 - 120 min, key in the number of minutes to add, and select Continue.
  8. To move your time back, select Subtract 1 - 120 min, key in the number of minutes to subtract, and select Continue.
  9. Press Home to return to the Home screen.
If your time is off by more than 2 hours, follow these steps.
  1. Press Options.
  2. Press Page Down twice.
  3. Select Advanced Features.
  4. Press Page Down
  5. Select Run Install Mode.
  6. Select English.
  7. Enter the local time in HH:MM format.
  8. Select AM or PM.
  9. Select This Is Correct.
  10. Press Clear/Back.
  11. Select Quit the Install.
  12. Select Yes.
Note: If a prompt asking for a scale code appears, select Continue.

Use the Contact Us options below if you need further assistance. Have your model and serial number ready.

UPDATED: August 14, 2021