The screen is flashing the PB logo on the SendPro C Lite, SendPro C, SendPro+ (2H00, 8H00)

Print this support article
Products affected: SendPro® C Lite, SendPro® C, SendPro®+ (2H00, 8H00)

Issue

The Pitney Bowes logo is flashing on the device's screen.

Cause

The screen does not have enough battery power to complete the power up cycle. 

Resolution

  1. Allow the device's screen to flash for one hour.
  2. If the screen does not remain on after one hour, please use the Contact Us options below.

UPDATED: November 30, 2020