How to send mail entering the weight manually on the SendPro 300

Print this support article
Products affected: SendPro® 300
  1. From the Home screen, select Mail.
  2. Select Weigh/Rate from the list on the left.
  3. Select Enter weight manually.
  4. Select Enter Pounds.
  5. Tap the box and enter the pounds (maximum is 70 lbs.).
  6. Select the Return key on the keypad.
  7. Select Enter Ounces.
  8. Tap the box and enter the ounces.
  9. Select the Return key on the keypad.
  10. Select Continue.
  11. Select the mail Class.
  12. Select the Package type.
  13. Select other options if presented and select Done when finished.
  14. Apply postage to the mail piece:
  • If using the moistener: Place the envelope flap side down along the back wall of the moistener and slide the envelope flap under the blue edge of the moistener unit. Slide the envelope towards the right  until the system grasps it.
  • If not using the moistener: Place the envelope or tape strip up against the registration wall of the system and slide it to the right until the system grasps it. The system prints the meter stamp and ejects the envelope or tape strip.

UPDATED: June 08, 2021