How to send mail using the scale on the SendPro 300

Print this support article
Products affected: SendPro® 300
  1. From the Home screen, select Mail.
  2. Select Weight/Rate from the list on the left.
  3. Place a mail piece on the weighing platform.
  4. Select Rate mail on scale.
  5.  Select the mail Class.
  6. Select the Package type.
  7. Select other options if presented and select Done when finished.
  8. You can choose another account or use the account that is presented. If an account password was established, you will be prompted for it.
  9. Apply postage to the mail piece:
  • If using the moistener: Place the envelope flap side down along the back wall of the moistener and slide the envelope flap under the blue edge of the moistener unit. Slide the envelope towards the right  until the system grasps it.
  • If not using the moistener: Place the envelope or tape strip up against the registration wall of the system and slide it to the right until the system grasps it. The system prints the meter stamp and ejects the envelope or tape strip.

UPDATED: March 13, 2018