Skip to main content
Related Search Topics: Installation, Setting Up & Drivers
Print this support article

Installing PitneyShip Cube on a Windows PC using a USB connection as an existing PitneyShip user

Learn how to set up your PitneyShip Cube on your Windows PC using a USB connection as an existing PitneyShip user.
Products Affected: PitneyShip™ Cube, PitneyShip™

These instructions will guide you through a first-time installation of your PitneyShip Cube on a Windows PC as an existing PitneyShip user. These instructions are for users wanting to connect their PitneyShip Cube using a wired USB cable connection.

  1. Opening the box and unpacking
  2. Logging in to your PitneyShip account
  3. Connecting your PitneyShip Cube
  4. Performing a test print

number-1 Opening the box and unpacking

What's in the box

  1. Unpack the device and remove the protective scale spacers.
    Removing the protective scale spacers
  2. Feed the label roll into the slot.
    1. Open the label roll cover.
      Opening printer
    2. Remove the protective sheet and the tape from the label roll.
      Removing protective slip and tape
    3. Feed the label roll over the top of the black roller and out through the slot. Do not feed the label roll under the black roller. This will cause the label roll to jam.
      Feeding label roll through slot
  3. Connect the device to a power source and press the power button. The LED will light up orange and then change to flashing white until your PitneyShip Cube is connected.
    Connecting the PitneyShip Cube to a power sourcePressing power button
  4. Set up and complete installation using PitneyShip.

number-2 Logging in to your PitneyShip account

  1. Go to cube.pitneybowes.com.
  2. Click Sign in. You will be redirected to the login screen.
  3. Enter your email address and password and click Sign In.
  4. Click on Get Started to begin your PitneyShip Cube installation.

number-3 Connecting your PitneyShip Cube

  1. Connect the USB cable to your printer and your PC.

    Connecting the USB cable to the printer
  2. When asked, "How do you want to connect your PitneyShip Cube?" select With USB.
  3. Review the Before installing prompt and click Next.
    Before installing prompt
  4. Click Download PitneyShip Cube Driver.
    1. Once the download is complete, go to your Downloads folder, or your designated page for downloads, and double-click the PB_Printer_and_Scale_driver.exe file. This will open the installer. If you are unable to find the file, click downloading again.
    2. Review the license agreement and select "I accept the terms in the license agreement", and click Next.
    3. Click Finish to start the installation process. The Seagull Driver Wizard will open.
    4. Select Install Print Drivers and click Next.
    5. Select USB and click Next.
    6. Select Install a driver for a Plug and Play printer and click Next.
    7. Click Next.
    8. Click Finish.
    9. Once the installation is complete, click Close.
  5. Once the driver is installed, go to Printers and Scanners on your computer. Click Yes to confirm that your PitneyShip Cube has been added to your printer list.
  6. Click Download DeviceHub.
    1. Once the download is complete, go to your Downloads folder, or your designated page for downloads, and double-click the DeviceHubXX.XX.X.exe file. This will open the installer.
    2. Click Install.
    3. Once the installation is complete, click Finish to close the installer.
    4. On your computer, check the Systems tray at the bottom of your desktop and find the DeviceHub icon. Click Yes to confirm that DeviceHub was successfully installed.
    5. Click Activate DeviceHub. A new tab will open.
    6. Once DeviceHub activation is successful, close the tab.
  7. Click Continue PitneyShip Cube Setup.
  8. Confirm your location and click Next.

number-4 Performing a test print

  1. Click Print to perform a test print.
  2. Tap No if the test print was unsuccessful. Then, tap Print Again. If the second test print was unsuccessful, please chat with us for further assistance.
  3. Tap Yes if your test print was successful.
  4. Tap Get Started. PitneyShip will now set up your experience. This could take a few minutes to complete.

Your PitneyShip Cube setup is now complete.

Related topics

UPDATED: October 11, 2023