Error 18FF on the SendPro C, SendPro C Auto

Some transactions failed to sync on your SendPro C. You may be able to clear the error by restarting your device and synchronizing transactions.
Products affected: SendPro® C, SendPro® C Auto (2H30, R2H30, 7H30C, R7H30C, 7H30A, R7H30A)

Issue

The device displays error code 18FF.

Cause

Some transactions failed to synchronize.

Resolution

Step 1: Restart your device

You may be able to clear the error by restarting your device. Follow these steps to perform a safe restart.

  1. Unplug the power cord. The screen turns off after 10 seconds.
  2. Wait 30 seconds.
  3. Plug the power cord directly back into a wall outlet. Check that the wall outlet is working correctly.
  4. Quickly tap and release the power button to turn the device back on.

Once the device has fully restarted, go to Step 2.

Step 2: Sync transactions

  1. Tap Settings.
    Settings icon
  2. Scroll down to the Envelope Printer Settings section.
  3. Tap Sync Transaction Data. A series of messages appear on the screen, starting with Preparing Transaction Data followed by Sending Transaction Data.
  4. Once you upload the transactions, the message Transaction Data Sent appears. If there are no more transactions to upload, the message No Sync Required appears.

Depending on the number of transactions you need to upload you may have to sync transactions multiple times. If you have to sync more than 3 times, please contact us for further assistance.

UPDATED: 29 February 2024

Contact Us
Email
Report an issue from your inbox.
13 23 63
Mon – Fri, 8am - 5pm (Ex. Public Holiday)