Adjusting the horizontal alignment on the AddressRight 300

Learn how to adjust the horizontal alignment on the AddressRight 300.
Products affected: AddressRight® 300 Feeder

Horizontal alignment adjusts offset of individual printheads (side-to-side) offset to fine tune horizontal positioning of the printout.

To adjust the horizontal alignment:

  1. Tap Printer Setup on the Main Menu, or press the Quick Menu button on the Control Panel.
  2. Tap Horizontal Alignment.
    horizontal-300-us_275x156
  3. Select the desired printhead.
  4. Tap the directional arrows to move the bar in the desired direction. You can align individual printheads up to ±100.0 microns in 5.0 micron increments.
  5. Tap Reset to reset the horizontal alignment to 00.0 (default).
  6. Tap Test Print to print a test page using the current adjustments and print parameters to check printing quality and printhead alignment.

UPDATED: 25 April 2022

Contact Us
Email
Report an issue from your inbox.
13 23 63
Mon – Fri, 8am - 5pm (Ex. Public Holiday)