Adjusting the vertical alignment on the AddressRight 300

Learn how to adjust the vertical alignment on the AddressRight 300.
Products affected: AddressRight® 300 Feeder

Vertical alignment disables the top nozzles in individual printheads to remove any overlap to fine tune vertical positioning of the printout.

To adjust the vertical alignment:

  1. Tap Printer Setup on the Main Menu, or press the Quick Menu button on the Control Panel.
  2. Tap Vertical Alignment.
    vertical-300-us_276x156
  3. Select the desired printhead.
  4. Tap the directional arrows to move the bar in the desired direction. You can adjust the individual printheads up to ±1.0 microns in 0.1 micron increments.
  5. Tap Reset to reset the vertical alignment to 0.0 (default).
  6. Tap Test Print to print a test page using the current adjustments and print parameters to check printing quality and printhead alignment.

UPDATED: 25 April 2022

Contact Us
Email
Report an issue from your inbox.
13 23 63
Mon – Fri, 8am - 5pm (Ex. Public Holiday)