Loading an insert feeder on the DI900, DI950, and Relay 5000-8000

To avoid jams and crooked folds, be sure to load material correctly on your inserter.
Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000

To avoid jams and crooked folds, be sure to load material correctly on your inserter.

Follow these steps to load material into an insert tray:

  1. Use the sled locking lever to slide the sled to the end of the tray. The sled automatically locks in place.
  2. Using the side guide adjuster, open the sides of the tray beyond the width of the material.
  3. Stand a stack of material straight up and against the front end of the tray, and in the orientation specified on the mailpiece icon tree and Home screen loading instructions.
  4. Using the side guide adjuster, bring the sides of the tray lightly against the material, then release the adjuster. The guides automatically spring back to a position that allows for proper clearance during feeding of the material in the tray.

UPDATED: 16 May 2022

Contact Us
Email
Report an issue from your inbox.
13 23 63
Mon – Fri, 8am - 5pm (Ex. Public Holiday)