Changing the default refill amount on the SendPro C Lite, SendPro C

Change the default refill amount to store an amount you want to refill your device with.
Products affected: SendPro®  C Lite, SendPro® C (2H78, R2H78)

Change the default refill amount to store an amount you want to refill your device with.

You can set the default refill amount during installation or change it at later time.

There are two ways to change the default refill amount:

From the Home Screen:

  1. Tap Settings.
    settings-icon
  2. Scroll down to the Envelope Printer Settings section.
  3. Tap Postage Refills.
  4. Tap the box under Default refill amount.
  5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to clear the amount.
  6. Enter the new amount.
  7. Tap Apply.
  8. Tap the back arrow to return to the Home screen.

From Envelope Printing:

  1. Tap Envelope Printing from the Home screen.
  2. Tap Postage Balance.
  3. Tap Refill Settings.
  4. Tap the box under Default refill amount
  5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to clear the amount.
  6. Enter the new amount.
  7. Tap Apply.
  8. Tap the back arrow to return to the Envelope Printing app.

UPDATED: 05 July 2023

Contact Us
Email
Report an issue from your inbox.
0800 748 639
Mon – Fri, 8am - 5pm (Ex. Public Holiday)