Skip to main content
Print this support article

Sealing envelopes without printing postage on the SendPro C Lite, SendPro C

Use Seal Only mode to seal envelopes without printing anything.
Products affected: SendPro®  C Lite, SendPro® C (2H78, R2H78)

Use Seal Only mode to seal envelopes without printing anything.

  1. Tap Print on Envelopes on the Home screen.
  2. Tap Print Mode. You may need to swipe up on the screen to see this option.
  3. Select Seal Only.
  4. Tap Apply.
  5. Place your envelope face up, flap down into the feeder. Be sure to slide the envelope flap under the edge of the feed deck.
    Envelope flap fed underneath the feed deck
  6. Insert the envelope into the device. The device seals the envelope.
    Envelope feeding through the device

Related topics

UPDATED: 03 February 2023

Contact Us
Email
Report an issue from your inbox.
0800 748 639
Mon – Fri, 8am - 5pm (Ex. Public Holiday)