Loading an insert feeder on the DI900, DI950, and Relay 5000-8000
To avoid jams and crooked folds be sure to load material correctly on your inserter.
Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000
To avoid jams and crooked folds, be sure to load material correctly on your inserter.
Follow these steps to load material into an insert tray:
- Use the sled locking lever to slide the sled to the end of the tray. The sled automatically locks in place.
- Using the side guide adjuster, open the sides of the tray beyond the width of the material.
- Stand a stack of material straight up and against the front end of the tray, and in the orientation specified on the mailpiece icon tree and Home screen loading instructions.
- Using the side guide adjuster, bring the sides of the tray lightly against the material, then release the adjuster. The guides automatically spring back to a position that allows for proper clearance during feeding of the material in the tray.
UPDATED: 20 January 2023