Adding a normal preset on the DM100

Add a normal preset to save the default settings on your meter.
Products affected: DM100™

The Normal Preset is the default setting on your meter that you define with your most commonly used values, such as the class, envelope message and mail type.

Your meter automatically applies the Normal Preset value when you turn it on and after it wakes from sleep mode. If you select Normal Preset your meter returns to these default values.

Important: You cannot edit the Normal Preset. To change it, define a new normal preset to replace the previous one.

  1. Press Home.
  2. Select Class and select the options that you wish to save as a preset:
    • Carrier.
    • Class.
    • Mail type (Letter, Large Letter, etc).
  3. Press Page Down from the Home screen to select an envelope message and / or text message.
  4. Select Ad to see the available envelope messages.
  5. Select Text message to see the available text messages.
  6. The meter returns to the Home screen. Press Custom Presets.
  7. Select Define Normal Preset.
  8. Press Yes/Enter to confirm all values are correct.
  9. Press Home.

UPDATED: 27 January 2023

Contact Us
Report an issue from your inbox.
0800 748 639
Mon – Fri, 8am - 5pm (Ex. Public Holiday)