Pairing your QL-820NWB label printer with the Smart Access Management tablet
Pair your QL-820NWB label printer via Bluetooth with the Smart Access Management tablet to begin the visitor badge printing process.
Products Affected: Smart Access Management®
Pair your QL-820NWB label printer via Bluetooth with the Smart Access Management tablet to begin the visitor badge printing process.
If your QL-820NWB label printer is built into your visitor kiosk, you do not need to pair the label printer.
Important: If however, your QL-820NWB label printer is separate from your kiosk, you will need to pair the printer to the tablet.
Turning on Bluetooth on the QL-820NWB label printer
- Press and hold the power button.
- Press Menu.
- Press the up or down button to locate the Bluetooth menu.
- Press OK.
- Press the up or down button to select Bluetooth On/Off, then press OK.
- Press the up or down button to select On, then press OK.
- Press the back button to return to the Home screen.
Pair your QL-820NWB label printer with the Smart Access Management tablet
- Scroll up from the bottom of the tablet.
- Tap Settings.
- Tap Connections.
- Tap the Bluetooth slider to enable Bluetooth, if required.
- Tap Bluetooth.
- Tap the QL820NWBxxxx option.
- Tap Pair.
- Scroll up from the bottom of the tablet to return to the Home screen.
Related topics
UPDATED: 03 March 2023
Contact Us
Email
Report an issue from your inbox.
0800 748 639
Mon – Fri, 8am - 5pm (Ex. Public Holiday)