Clearing Material Jams in the Envelope Inserting and Sealing Area in Relay 2500, 3500, 4500
Lift the tinted plastic cover and lower the envelope inverter access door.
The points identified here can be unlatched to allow access to jammed material.
- Remove the jammed material. If necessary, use the manual advance knob to move the material forward.
Tap the Clear Deck button to clear the paper path of any remaining material.
- Tap the Start button to resume operation.
Once you locate the jammed material, you may need to use the manual advance knob to manually feed paper out of the grip of feed rollers.
The manual advance knob is located behind the drop-down cover at the left front of the inserter.
UPDATED: 14 August 2021