Skip to main content
Related Search Topics: Features & Settings
Print this support article

How to create a job on the DI500 and DI600

Learn how to create a job on the DI500 and DI600.
Products affected: DI500™ and DI600™
Follow these steps to create a job on the DI500/DI600:
  1. Make sure you know the details about all items in the job (envelope size, number of sheets to be folded, fold type, etc)
  2. Press Menu
  3. Select Supervisor Functions
  4. Enter code 71
  5. Select Create Job
  6. Select Job Settings
  7. Select the appropriate settings for your job from the following options:
  • Note: The selections you make for a setting and the options installed on your system determine the availability of job settings. As a result, some of the settings in the following list might not display on your system.
    1. Does this job use an outer Envelope
      • Yes  - Creates a job to be folded and Inserted
      • No - Fold Only (If not using an outer envelope, go step h)
    2. Select the depth of the Outer Envelope
      • 105 mm # 10
      • 152mm 6x91/2
      • Custom
    3. Does the Outer envelope have a window
      • Yes
      • No
    4. Seal Outer Envelope
      • Seal
      • Safe Seal (A reduced speed sealing option)
      • No Seal
    5. What does the job contain
      • Sheets Only
      • Sheets and Inserts
      • Inserts Only
    6. Select the length of the longest Sheet
      • 279 mm Letter
      • 356 mm Legal
      • Custom
    7. Is Optical Mark Recognition (OMR) used in this job
      • No, OMR not used
      • Yes,  Non - Selective Feed
      • Yes, Selective Feed
    8. Select desired Fold Type
      • C Fold
      • Z Fold
      • Double Fold
      • Single Fold
    9. Select the position of the address on the First Sheet Stack
      • Top
      • Bottom
    10. Does your first stack of sheets contain pre-collated sets
      • Yes
      • No
    11. Select the number of sheets in the pre-collated set
      • 2
      • 3
      • 4
    12. Do you want to link feeders? Note: Linking feeders means you put the same sheets in multiple feeders.
      • Yes
      • No
    13. Select the number of feeders that will contain the sheet stack
      • 2
      • 3
      • 4
    14. Is Double Detect used for this sheet stack
      • Yes
      • No
    15. Are there any more stacks of sheets used in this job
      • Yes
      • No
    16. Select the number of Inserts used in this mail piece.
      • 1
      • 2
  1. Select Insert Type. Note: Maximum thickness of an Insert is 2mm.
    • Booklet
    • Slip
    • Pre-Fold Insert
    • Reply Envelope
  2.  Select the number of feeders that will contain this insert.
    • 1
    • 2
  3. Is Double detect used for this insert
    • Yes
    • No
  4. Batch Count
    • Enter the Batch Count and Save
    • Batch Count off
  5. Job Name
    1. Enter Job Name
    2. Save
  6. Job Comments
    1. Enter Job Comments and save
    2. Save and Skip

UPDATED: 21 April 2021