Changing the default refill amount on the SendPro C

Print this support article
Products affected: SendPro® C (2H25)

Change the default refill amount to store an amount you want to refill your device with.

There are two ways to change the default refill amount:

From the Home Screen:

  1. Tap Settings.
    settings-icon
  2. Scroll down to the Envelope Printer Settings section.
  3. Tap Postage Refills.
  4. Tap the box under Default refill amount.
  5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to clear the amount.
  6. Enter the new amount.
  7. Tap Apply.
  8. Tap the back arrow to return to the Home screen.

From Print on Envelopes:

  1. Tap Print on Envelopes from the Home screen.
  2. Tap Postage Balance.
  3. Tap Refill Settings.
  4. Tap the box under Default refill amount
  5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to clear the amount.
  6. Enter the new amount.
  7. Tap Apply.
  8. Tap the back arrow to return to the Print on Envelopes app.

UPDATED: 07 October 2021