Turning the preset feature on or off on the DM50, DM55

Print this support article
Products affected: DM50™, DM55™ (K724)

If the preset feature is enabled, the franking machine reverts to the preset values when it is turned on or wakes up from sleep mode.

If the preset feature is disabled, the franking machine reverts to the values last used.

To turn the preset feature on:

  1. Press Menu / Options.
  2. Press Review (up) until Change Setup? appears.
  3. Press Enter/Yes.
  4. Press Review (down) until Use preset setup? appears.
  5. Press Enter/Yes.
    1. If the preset feature is already ON, the display shows View stored Preset?
    2. If the preset feature is OFF, the display shows Turn Preset ON? Press Enter/Yes.
  6. When View stored Preset? appears, press Enter/Yes to view your preset values, if required.
  7. When finished, press Clear once and follow the prompts to return to the Main screen.

To turn the preset feature off:

  1. Press Menu / Options.
  2. Press Review (up) until Change Setup? appears.
  3. Press Enter/Yes.
  4. Press Review (down) until Use preset setup? appears.
  5. Press Enter/Yes.
    1. If the preset feature is on, View stored Preset? appears. Press Review (down) twice until Turn Preset OFF? appears. Press Enter/Yes.
    2. If the preset feature is already off, Turn Preset ON? appears. Press No.
  6. Press No to return to the Main screen.

If you need further assistance, please use the Contact Us options below.

Related topics

UPDATED: 22 April 2021