Skip to main content
Print this support article

Sealing the envelope only, bypass all printing on the on the SendPro C Auto

Applies to SendPro C Auto models with PCN 9H10
Products affected: SendPro® C Auto (9H10)
  1. Tap Envelope Printing.
  2. Tap Print Mode on the lower left side of the Envelope Printing mail screen. You may have to swipe up on the screen to see this option.
  3. Swipe up on the Print Mode screen and tap Seal Only.
  4. Tap Apply.
  5. Load the envelopes onto the feeder with the flap side facing down and the top edge against the rear wall.

 

UPDATED: 10 June 2021