How to set or disable the lock code on the mailstation or mailstation2

print
Products affected: mailstation™ or mailstation2™
The lock code prevents unauthorized access to the system after the meter has entered sleep mode, or when your mailstation™ or mailstation2™ is powered up.

Follow these steps to enable a lock code on your meter:
  1. Press Menu
  2. Use the Review buttons to scroll to Change Setup? Press Enter/Yes
  3. Use the Review buttons to scroll to Use Lock Code Setup?
  4. Press Enter/Yes
  5. Meter will prompt Turn On Lock Code (yes/no)?
  6. Press Enter/Yes
  7. Type in a four-digit code and, press Enter/Yes
  8. Re-enter the same code to confirm. A message confirms the choice.
  9. Press Clear/Back and when prompted to stay in setup, press No to return to Main screen

Follow these steps to disable a lock code:
  1. Press Menu
  2. Use the Review buttons to scroll to Change Setup? Press Enter/Yes
  3. Use the Review buttons to scroll to Use Lock Code Setup?
  4. Press Enter/Yes
  5. The meter prompts you to enter the lock code at this point. Enter the four-digit code.
  6. Press Enter/Yes
  7. Use the Review buttons to scroll to: Turn Lock Off and press Enter/Yes
  8. Meter will indicate the lock has been disabled
  9. When prompted to stay in setup, press No to return to Main screen

UPDATED: July 21, 2015