How to fill the moistener on the DM400C and DM475

print
Products affected: DM400C™ and DM475™
Use the following steps to fill the moistener bottle:
  1. Check the sight window on the front to see the liquid level
  2. Open the feeder access cover
  3. Remove the moistener bottle and place it on the table top with the cap facing up
  4. Unscrew the moistener bottle cap, and fill the moistener bottle with E-Z Seal® solution
IMPORTANT: Do not overfill the moistener bottle.
  1. Secure the moistener bottle cap and place the bottle back in its original location (upside down in machine)
  2. Close the cover

UPDATED: May 15, 2015