Checking the software version on the mailstation or mailstation2

print
Products affected: mailstation™, mailstation2™
There are three ways to check the software version on the mailstation™ and mailstation2™:
From the Menu:
  1. Press the Menu key.
  2. Press the down Review arrow to scroll to Select a report? Press Enter/yes.
  3. Press the down Review arrow to scroll to View software ver. report? Press Enter/yes.
  4. Press the down Review arrow to scroll to the UIC number.
  5. Press Clear/Back to return to the Reports menu. Follow the prompts to return to main screen.

From a meter report:
  1. Press Menu.
  2. Press the down Review arrow to scroll to Select a report? Press Enter/yes.
  3. Press the down Review arrow to scroll to Print Software Version report? Press Enter/yes.
  4. At the prompt, insert a tape sheet or envelope into the machine.
  5. Locate the UIC number on the printed report.

From PC Meter Connect (K7C2/mailstation2 only):
  1. Launch PC Meter Connect on the computer that is connected to the meter.
  2. Select the Updates tab.
  3. In your meter panel, click Details>>.
The software version number is also displayed very briefly while the meter is turning on.

UPDATED: December 06, 2018