How to seal an envelope without printing on the DM100i and DM125

Print this support article
Products affected: DM100®i and DM125™
If you are using the optional moistener with pre-addressed envelopes, you can set your system to process mail using seal only; without printing on them.

Follow these steps to set your mailing system to seal envelopes without printing indicia on your DM100 and DM125:
  1. Press Print Menu
  2. Select Seal only
  3. Slide just the flap under the blue edge of your feed deck. A brush below the deck wets the flap.
  4. Slide your envelope to the right until your system takes hold of it. The system seals and ejects the piece
  5. Select Exit Seal Only when finished to return to your Home screen

UPDATED: 14 August 2021