How to find the software version on the DM100i and DM125

Print this support article
Products affected: DM100®i and DM125™
There are 2 ways to check the software version on the meter:
  • View on the meter display:
  1. Power the meter OFF by unplugging it from the wall outlet
  2. Wait one minute
  3. Power the meter ON by plugging it back into the wall outlet
  4. During initialization, look for Version and make a note of the numbers
  • Print a report, from the home screen:
  1. Press the Reports key
  2. Select Printable Report
  3. Press Page Down and select Configuration Rpt
  4. When prompted, insert tape sheet or envelope into the machine to print the report

UPDATED: 14 August 2021