How to setup folding non standard sized paper in the DF400

Print this support article
Product affected: OfficeRight™ DF400
Non-standard sheet sizes require that each fold plate setting be measured from a sample sheet.
NOTE: There is a 280 mm ruler on the side of the folder that can be used to measure folds.
To setup the DF400 to fold a non standard size:
  1. Fold a sheet by hand
  2. Unfold the sheet and hold it face up with the leading (top) edge to the left
  3. Measure the shaded panel (shown in illustration) and set dimension A
  4. Measure the shaded panel (shown in illustration) and set dimension B
Fold Chart
 

UPDATED: 04 June 2021