Error: 0213420027, how to resolve on the Connect+ 500W, Connect+ 1000 and more

Learn resolving error 0213420027 on the Connect+ 500W, Connect+ 1000, Connect+ 2000, and Connect+ 3000.
Products affected:  Connect+ 500W®, Connect+ 1000®, Connect+ 2000®, and Connect+ 3000®

Issue

The Connect+® displays error code 0213-42-0027, and will not print.

Cause

There is a hardware or firmware issue.

Resolution

Check that all covers are closed

You may be able to clear the error by simply restarting your meter.  Here are the steps to follow for a safe restart:
  1. Select the green house at the top of the screen to go to the home screen
  2. Select Shut Down from the lower right corner
  3. Select Shut Down from the menu
  4. Select Shut Down on the pop up
  5. Wait for the screen to go black and the blue light on the front to go out.  This may take several minutes.
  6. After everything has been off for 10 seconds press the power button to power the Connect+ back up
Note: You should perform a shut down nightly using the shut down icon, not the power button at the front of the equipment

If your issue is not resolved, contact customer support from 8 am to 8 pm Eastern Time. Have your model number ready.

UPDATED: 14 August 2021