Can't exit sleep mode on the SendPro Mailstation
Products affected:
SendPro® Mailstation
Issue
Your device is stuck on the "Going to Sleep" screen or is asleep and will not wake.
Resolution
- Disconnect the scale and any other USB connected device from the SendPro Mailstation.
- Disconnect the power cord from the back of the machine.
- Wait ten seconds.
- Plug the cord back in firmly.
- Tap the power button.
- Reconnect the scale after the device reaches the Home screen.
Important: Do not connect any USB device except the scale.
UPDATED: 20 June 2023