Replacing the waste pad on the DM125 and DM300C-DM475C
Products affected: DM125™, DM300C™, DM400C™ and DM475™ (PREC and G910)
Follow these steps to replace your printer waste pad (ink pad):
To order a replacement waste pad, sign in and create a technical support case.
Use the Contact Us options below if you need further assistance.
Related articles :
“Waste Tank Full” or “Waste Tank Near Full” message on the DM125
“Waste Tank Full” or “Waste Tank Near Full” message on the DM300C-DM475
- Squeeze your tray handles and pull the waste pad tray assembly out of the right side of your meter.
- Using rubber gloves or a paper towel, lift out your plastic waste tray holder.
- Place your new waste tray in the holder.
- Slide your waste pad tray assembly back into the right side of your meter.
To order a replacement waste pad, sign in and create a technical support case.
Use the Contact Us options below if you need further assistance.
Related articles :
“Waste Tank Full” or “Waste Tank Near Full” message on the DM125
“Waste Tank Full” or “Waste Tank Near Full” message on the DM300C-DM475
UPDATED: February 16, 2021
