Updating Canada Post rates on the DM300C

Print this support article
Products affected: DM300C™ (G910)
Make sure that your system is connected using SmartLink™, PC Meter Connect, local area network connection (LAN) or an analog phone line to communicate with the Pitney Bowes Data Centre.

1. Click on the link for your usual connection method for detailed rate update instructions. 2. Confirm your meter update

Using Smartlink™
Unless a lock code is enabled, meters that are always powered on and connected via SmartLink™ get updated automatically.

If you use a lock code, unlock your meter and follow these steps to update your meter:
  1. Press C to go to the Home screen.
  2. Press Refill Postage.
  3. Select Check PBP balance.
  4. Select Continue.
  5. Select Get Update Now.  The screen displays several messages including downloading updates and installing update.
Important: If the 'Get Update Now' prompt does not appear, either your meter is already be up-to-date or your updates are not ready for download. Visit our Rates and Software Updates page for more information.
  1. At the prompt System Update Complete, select Return Home.


Using PC Meter Connect™, a local area network connection (LAN) or an analog phone line (that is not shared with a fax or other device)
  1. Press C to go to the Home screen.
  2. Press Refill Postage.
  3. Select Check PBP balance.
  4. Select Continue.
  5. Select Get Update Now.  The screen displays several messages including downloading updates and installing update.
Important: If the 'Get Update Now' prompt does not appear, either your meter is already be up-to-date or your updates are not ready for download. Visit our Rates and Software Updates page for more information.
  1. At the prompt System Update Complete, select Return Home.


Click on the Confirm Meter Update button to verify that your Canada Post rate update was installed successfully:

User-added image
DM300C (G910)


Warning! Do not unplug your power cord or remove the network cords from your meter while updating, as this may cause damage to your meter. However, if your meter has been unresponsive for more than 15 minutes:
  • Disconnect the power cord
  • Wait one minute
  • Plug your meter's power cord back in
  • Restart the update process
Note: After you download the new rates, the postage meter stores them until they take effect. Your meter automatically switches to the new rates on the effective date if the meter is updated before the effective date.

Related articles

UPDATED: 10 February 2021