Cleaning the Sensors, Roller and media Path on the PB-SP100 Printer

Cleaning the sensors, roller and media path on your printer is essential maintenance and will help to maintain good print quality.
Products affected: PB-SP100
 

Cleaning the sensors, roller and media path on your printer is essential maintenance and will help to maintain good print quality.

To perform this maintenance please follow the instructions below.

Warning: Please refer to the PB-SP100 Safety instructions before lifting the top cover. Do not touch heated area of print–head when cleaning. Personal injury may result from static electricity.
  1. Open the top cover and remove the label roll.
  2. Remove any dirt, dust or foreign objects with a cloth or cotton swab soaked in alcohol.
    sp-100-top-cover-open_500x399

Caution

  • Ensure that the printer is turned off before cleaning.
  • The Print head is very hot when printing. Allow to cool before cleaning the print head.

UPDATED: August 14, 2021

Contact Us
Live Chat
Available • Closes at 8pm ET
Sales team hours are 8am-6pm ET
Live Chat
Live Chat is currently unavailable.
Chat is available Mon-Fri, 8am-8pm ET
Create a case
Submit support requests (Sign in required)
1-800-522-0020
Mon-Fri, 8am - 8pm ET