Adding a graphic to your envelope or tape on the SendPro C Lite, SendPro C, SendPro+, SendPro C Auto

Your device comes with a set of standard graphic images that you can add to your envelopes or tapes when you print your postage
Products affected: SendPro® C Lite, SendPro® C, SendPro®+, SendPro® C Auto (2H00, 8H00, 9H00)

Your device comes with a set of standard graphic images that you can add to your envelopes or tapes when you print your postage. Graphic ads are also known as ads, slogans or logos. Examples include PLEASE OPEN IMMEDIATELY, RECYCLE and Season's Greetings.

Note: At this time, you cannot add your own custom graphics to a SendPro C H200 device.

  1. Weigh your envelope, select a class, and select any special services required.
  2. Tap the Graphics icon on the Envelope Printing screen.
  3. Select the graphic you wish to use.
  4. Tap Apply.
  5. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have, feed the envelopes manually or tap Start to feed the envelopes.

To remove a graphic:

  1. Tap the current graphic to deselect it.
  2. Tap Apply.
Related topics: If you need further assistance, please use the Contact Us options below.

UPDATED: August 14, 2021

Contact Us
Live Chat
Available • Closes at 8pm ET
Sales team hours are 8am-6pm ET
Live Chat
Live Chat is currently unavailable.
Chat is available Mon-Fri, 8am-8pm ET
Create a case
Submit support requests (Sign in required)
1-877-213-7284
Mon-Fri, 8am - 8pm ET